Mosquito Helicopter Forums
Hirth carb and intake - Printable Version

+- Mosquito Helicopter Forums (http://forum.mosquito-helicopter.info)
+-- Forum: General Discussion (http://forum.mosquito-helicopter.info/forumdisplay.php?fid=69)
+--- Forum: Fuel and Engine (http://forum.mosquito-helicopter.info/forumdisplay.php?fid=34)
+--- Thread: Hirth carb and intake (/showthread.php?tid=9200)



Hirth carb and intake - Jerrod - 05-12-2018

Think this intake and carb set up will work. This is what the previous owner had in mind so carbs would not hit homemade intakes to offset them. Thoughts anyone


RE: Hirth carb and intake - jimwitkowski - 05-14-2018

[attachment=2604][attachment=2606][attachment=2607]
[attachment=2604 Wrote: Jerrod pid='31613' dateline='1526161382']Think this intake and carb set up will work. This is what the previous owner had in mind so carbs would not hit homemade intakes to offset them. Thoughts anyone

Jerrod, the MZ202 engine has the same set up. The first pic is the MZ202. The second and third pic is another Hirth installed on the Mosquito.


RE: Hirth carb and intake - Chuck308 - 05-14-2018

(05-14-2018, 12:28 AM)jimwitkowski Wrote:
(05-12-2018, 09:43 PM)Jerrod Wrote: Think this intake and carb set up will work. This is what the previous owner had in mind so carbs would not hit homemade intakes to offset them. Thoughts anyone

Jerrod, the MZ202 engine has the same set up. The first pic is the MZ202. The second and third pic is another Hirth installed on the Mosquito.
the second pic is of my engine hirth. got the intakes from doug bryant


RE: Hirth carb and intake - jimwitkowski - 05-14-2018

(05-14-2018, 01:01 AM)Chuck308 Wrote:
(05-14-2018, 12:28 AM)jimwitkowski Wrote:
(05-12-2018, 09:43 PM)Jerrod Wrote: Think this intake and carb set up will work. This is what the previous owner had in mind so carbs would not hit homemade intakes to offset them. Thoughts anyone

Jerrod, the MZ202 engine has the same set up. The first pic is the MZ202. The second and third pic is another Hirth installed on the Mosquito.
the second pic is of my engine hirth. got the intakes from doug bryant

Chuck, the third pic is also from your's.


RE: Hirth carb and intake - Jerrod - 05-14-2018

(05-14-2018, 02:24 AM)jimwitkowski Wrote:
(05-14-2018, 01:01 AM)Chuck308 Wrote:
(05-14-2018, 12:28 AM)jimwitkowski Wrote:
(05-12-2018, 09:43 PM)Jerrod Wrote: Think this intake and carb set up will work. This is what the previous owner had in mind so carbs would not hit homemade intakes to offset them. Thoughts anyone

Jerrod, the MZ202 engine has the same set up. The first pic is the MZ202. The second and third pic is another Hirth installed on the Mosquito.
the second pic is of my engine hirth. got the intakes from doug bryant

Chuck, the third pic is also from your's.

Thanks a lot Jim. This makes me feel much better I have not run this setup I was afraid throttle response etc. Mght suffer have not run yet but will be soon.