Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Late model U Haul Mosquito Transport
#1
Seeking someone with experience transporting an assembled Mosquito with rotor installed in a late model U Haul 26' (24' box) truck with metal floors and wheel wells on floor. Please share your experience on loading and how the Mosquito fit through the loading door and a tie down / anchoring methods used. Huh
Reply
#2
(01-24-2018, 10:45 PM)Skyking Wrote: Seeking someone with experience transporting an assembled Mosquito with rotor installed in a late model U Haul 26' (24' box) truck with metal floors and wheel wells on floor. Please share your experience on loading and how the Mosquito fit through the loading door and a tie down / anchoring methods used. Huh

If the truck have e-track installed in the box then you would have a good start (metal floor will help heli. slide). What is the distance between wheel wells? You might be better taking the blades off. If you don't get more replies PM.

Michael
XE 285  1205 (Myrtle)
Start: 8/1/2013
Finish: 5/24/2014
Arrived home: 10/11/2014

Reply
#3
I have been told that it's easy to remove the blades and re-install without fear of re-tracking / re-balance. Maybe someone will share the process with detail and pics.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)