Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Hirth carb and intake
#1
Think this intake and carb set up will work. This is what the previous owner had in mind so carbs would not hit homemade intakes to offset them. Thoughts anyone


Attached Files Thumbnail(s)
   
Reply
#2
           
[attachment=2604 Wrote: Jerrod pid='31613' dateline='1526161382']Think this intake and carb set up will work. This is what the previous owner had in mind so carbs would not hit homemade intakes to offset them. Thoughts anyone

Jerrod, the MZ202 engine has the same set up. The first pic is the MZ202. The second and third pic is another Hirth installed on the Mosquito.
Jim
Reply
#3
(05-14-2018, 12:28 AM)jimwitkowski Wrote:
(05-12-2018, 09:43 PM)Jerrod Wrote: Think this intake and carb set up will work. This is what the previous owner had in mind so carbs would not hit homemade intakes to offset them. Thoughts anyone

Jerrod, the MZ202 engine has the same set up. The first pic is the MZ202. The second and third pic is another Hirth installed on the Mosquito.
the second pic is of my engine hirth. got the intakes from doug bryant
Reply
#4
(05-14-2018, 01:01 AM)Chuck308 Wrote:
(05-14-2018, 12:28 AM)jimwitkowski Wrote:
(05-12-2018, 09:43 PM)Jerrod Wrote: Think this intake and carb set up will work. This is what the previous owner had in mind so carbs would not hit homemade intakes to offset them. Thoughts anyone

Jerrod, the MZ202 engine has the same set up. The first pic is the MZ202. The second and third pic is another Hirth installed on the Mosquito.
the second pic is of my engine hirth. got the intakes from doug bryant

Chuck, the third pic is also from your's.
Jim
Reply
#5
(05-14-2018, 02:24 AM)jimwitkowski Wrote:
(05-14-2018, 01:01 AM)Chuck308 Wrote:
(05-14-2018, 12:28 AM)jimwitkowski Wrote:
(05-12-2018, 09:43 PM)Jerrod Wrote: Think this intake and carb set up will work. This is what the previous owner had in mind so carbs would not hit homemade intakes to offset them. Thoughts anyone

Jerrod, the MZ202 engine has the same set up. The first pic is the MZ202. The second and third pic is another Hirth installed on the Mosquito.
the second pic is of my engine hirth. got the intakes from doug bryant

Chuck, the third pic is also from your's.

Thanks a lot Jim. This makes me feel much better I have not run this setup I was afraid throttle response etc. Mght suffer have not run yet but will be soon.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)